Filter
Top Products
Chapter 6
Removing and Replacing Components
Removing and Replacing Core I/O Cards
247
Installing the LAN Core I/O Card
To install the LAN core I/O card, follow these steps:
Step 1. Insert the replacement LAN core I/O card into slot 2.
CAUTION Always handle I/O cards by their edges. Failure to comply with this precaution can
result in damage to the card.
Ensure that you fully seat the card into the slot or the card can be damaged when
power is reapplied to the slot.
Figure 6-44 Installing the LAN I/O Card
Step 2. Close the blue PCI card latch for slot 2 by twisting it counterclockwise.
Step 3. Reconnect the LAN cables to the LAN core I/O card. Be sure to attach cables to their original
connectors.
Step 4. Replace the top cover. (See “Replacing the Top Cover” on page 183.)
Step 5. Push the server back into the rack until it stops.
Removing the SCSI Core I/O Card
To remove the SCSI core I/O card in slot 1, follow these steps:
Step 1. If rack-mounted, slide the server out from the rack until it stops. (See “Accessing a Rack-Mounted
Server” on page 177.)
Step 2. Remove the top cover from the chassis. (See “Removing the Top Cover” on page 182.)