HP (Hewlett-Packard) RP4410 Server User Manual


 
Replacement Parts
Replacement Parts List
Appendix A
272
Table A-1 provides CSR information.
Replacement Parts List
NOTE If you need to replace a system board, first remove the processors, DIMMs, and adapter boards,
and then transfer them to the new board.
You must transfer all jumper and switch settings from the old board to the new board.
Use this parts list whenever ordering parts for the HP 9000 rp4410 and rp4440 servers.
Table A-1 Customer Self Repair Information
Code Level Description Comments
AY Yes Level A with instructions
available in the service
guide
Requires you to replace these parts under warranty.
No technical skills required.
BY Optional Level B with instructions
available in the service
guide
Low to moderate technical skills required.
CY Optional Level C with instructions
available in the service
guide
High technical skills required.
N No Not a customer
replaceable part.
Some HP parts are not designed for customer self
repair. In order to satisfy the customer warranty, HP
requires that an authorized service provider replace
the part.
Table A-2 Replacement Parts List
Manufacturing
Part Number
Description
Part Number
Replacement
Part
Number
Exchange
Customer
Self
Repair
Cables
A6961-63006 Internal SCSI, Cable A6961-63006 N/A N
A6961-63005 QuickFind Diagnostic to Midplane,
Cable
A6961-63005 N/A N
A6961-63004 Power Distribution to Midplane
Ribbon, Cable
A6961-63004 N/A N
A6961-63003 Power Distribution to Midplane 10
pin, Cable
A6961-63003 N/A N