Filter
Top Products
Chapter 6
Removing and Replacing Components
Hot-Swappable Chassis Fan Unit
204
Step 3. Grasp the fan unit locking handle, tilt it up, and pull out the fan from the chassis.
Figure 6-19 Hot-Swappable I/O Chassis Fans Removal and Replacement
IMPORTANT When one fan unit is removed from the server, the remaining fan units operate at full
speed. Operation will continue until an overtemperature condition is detected. If an
overtemperature condition occurs, the server shuts down.
Step 4. Repeat the same process for removal and replacement of the hot-swappable power supply chassis
fan.