Filter
Top Products
SAVE CHANGES?
NO
To save your changes, press the Next key so that the message
window displays
SAVE CHANGES?
YES
Press the Select key to save the changes.
10. Press the Online key. The Online LED lights, and the
keyboard message window displays IDLE.
11. To verify the changes you just made, print a start-up page by
turning the printer off, then back on. Compare the serial port
settings listed on the page to those in your AUTOEXEC.BAT
file.
12. Try the communication test again. If a blank page ejects from
the printer, the printer and the computer are communicating.
You are ready to start printing.
If a blank page does not eject and you typed the file correctly, see
chapter 9, “Troubleshooting,” and refer to your DOS
documentation for more information.
About the Printer’s Communication Modes
The following sections explain the communication mode choices
you have with your printer, including the resident emulations,
Simultaneous Interface Operation (SIO), and Emulation Sensing
Processor (ESP) technology. All of these features enhance the
printer-computer interface.
Chapter 3
3-22 Connecting the Printer