Filter
Top Products
1. Make sure the printer is off line. Press the Menu key to display
CONFIGURATION
ADMINISTRATION
2. Press the Select key to enter the Administration menu; then
press the Next key to display
ADMINISTRATION
DISK OPERATIONS
3. Press the Select key to enter the Disk Operations submenu.
Then press the Next key to display
DISK OPERATIONS
REMOVE OPTION
4. Press the Select key to enter the Remove Option submenu.
Press the Next key until the address of the hard disk containing
the optional font or emulation displays in the message
window, then press the Select key.
5. When you are prompted, insert the card into the card slot. The
printer compares the contents of the disk with the contents of
the card and deletes the matching files from the hard disk.
6. When the file removal process is complete, press the Menu
key to exit the menu.
7. To remove the card, use the following procedure:
a. If you are removing an LN03 Plus or a ProCollection card, turn
off the printer. Otherwise, make sure the printer is off line (use
the Online/Offline key to turn off the LED).
b. Pull the card out gently.
c. Turn on the printer, if it’s off, and put it back on line.
Chapter 8
Printer Options 8-49