Filter
Top Products
factory default is upper. The current selection is indicated by the
corresponding LED.
NOTE: A status message on the control panel will let you know
immediately if the selected cassette isn’t installed. If the
selected cassette is out of paper, a paper out status
message appears when you send the job to be printed.
Operator Control/Chain Inputbins
Use this option to turn on or off cassette switching (chaining) when
the first cassette empties to another cassette with the same size and
type of media. The factory default is off.
Operator Control/Color Separation
Use this option to turn color separation on or off. The factory
default is off.
Operator Control/Color Model
Use this option to select between full-color or monochrome
printing. The factory default is full color. Monochrome must be
selected as the default if you want to print 600 dpi jobs on a printer
with less than 24 MB RAM. You also may want to select
monochrome when printing on legal-size media, because the
printer’s imageable region for full color is limited to 8.1" x 11.7"
(205.90 mm x 297.18 mm).
Operator Control/Manual Feed Size
Whenever you switch media sizes in the manual feed tray, you must
tell the printer what the new size is. The choices are letter, legal,
executive, A4, DL envelope, and Com 10 envelope. The factory
Chapter 4
Printer Configuration 4-19