Filter
Top Products
MISFEED
JAM
Media has jammed leaving the media cassette. Remove
the jam (see the “Misfeed Jam” section later in this
chapter for details).
OUTER
JAM
Media has jammed leaving the paper exit unit. Remove
the jam (see the “Outer Jam” section later in this
chapter for details).
PRINTING
STATUS
A status page has been requested via the Print Status
option in the Administration/Special Pages menu. This
does not necessarily mean that the status page is
printing at the particular moment the message is
displayed since other jobs may be ahead of it in the job
queue.
PRINTING
TEST
A sample page or a registration page has been
requested. This does not necessarily mean that the page
is printing as the message is being displayed (other jobs
may be ahead of it in the job queue).
PUT xxxxxx
PAPER IN
xxxxx INPUT
BIN
A media cassette is empty; reload the cassette. xxxxxx
PAPER is the media size the cassette is currently
configured for. xxxxx INPUT BIN is the empty
cassette. (See chapter 5, “Print Media and Daily
Operations,” for information on refilling cassettes.)
REPLACE
BELT
The OPC belt cartridge needs to be replaced. After
installing the new cartridge, you have to clear this
message through the control panel using the Clear
Warning option. (See chapter 6, “Consumables and
Preventative Maintenance,” for details on replacing the
OPC belt cartridge and “Administration/Engine” in
chapter 4 for details on clearing the warning.)
SIDE PANEL
OPEN
The waste toner cover is not fully closed. Close the
cover.
TOP COVER
OPEN
The top cover of the printer is either off or partially
open. Make sure it is seated properly and fully closed.
x TONER
EMPTY
A toner cartridge is empty. The x is replaced by the
color of the toner cartridge that needs to be replaced.
(See chapter 6, “Consumables and Preventative
Maintenance,” for information on replacing a toner
cartridge.)
Chapter 9
Troubleshooting 9-3