Filter
Top Products
3. From the paper wrapping, determine which is the printing side
of the paper (an arrow points in the direction of the printing
side on most wrappers). Then remove a stack of paper
approximately 1"/27 mm (250 sheets) or less.
NOTE: Make sure the paper is in good condition, free of such
things as folds, tears, or wrinkles.
4. Fan the paper (fig. 2.31) to prevent the sheets from sticking
together. Align the edges of the stack on a flat surface.
Fig. 2.31 Fan the Paper
Chapter 2
2-40 Initial Printer Setup