Filter
Top Products
White or Light Lines
■ Remove each toner cartridge, shake it as you do before
installing a new cartridge to redistribute toner, and then
reinstall the cartridge.
■ Install a new cartridge if necessary.
Light Image (Entire Page)
■ Increase the print density for any color(s) used on the page
(see “Adjusting Print Density” in chapter 5 for details).
■ Remove each toner cartridge for a color used on that page,
and shake it as you do before installing a new cartridge.
Then, reinstall the cartridge.
■ Install a new toner cartridge if necessary. (See “Replacing
a Toner Cartridge” in chapter 6 for details.)
Light Image on the Left or Right Side of the Page (all colors)
■ Make sure the printer is level (maximum 1° slant).
Dark Image (Entire Page)
■ Decrease the print density for any color(s) used on the page
(see “Adjusting Print Density” in chapter 5 for details).
■ Install a new cartridge if necessary. (See “Replacing a
Toner Cartridge” in chapter 6, “Consumables and
Preventative Maintenance,” for details.) The old cartridge
may be defective, releasing too much toner.
Chapter 9
9-30 Troubleshooting