Filter
Top Products
Area Information
Adapters Displays list of all the adapters in the system and their status.
Note: Click an adapter name to view details about its status in the
Service Settings page.
Perimeter Server
Status
The information in this area is displayed only after you have
added a perimeter server to Sterling B2B Integrator.
The Perimeter Servers area displays the following information:
v Cluster node name (in a clustered environment only)
v Whether the perimeter server is on or off
v State, either enabled or disabled
v Name of the perimeter server
v Last activity
Stopping Sterling B2B Integrator from the System
Troubleshooting Page
You can stop Sterling B2B Integrator using the System Troubleshooting page, using
either a soft stop (which allows all the business processes to complete) or a hard
stop (which stops the system and all the processing immediately). After a soft stop,
you must still perform a hard stop to stop the system. For more information about
the soft stop process, refer to “Soft Stop of Sterling B2B Integrator” on page 110.
Important: Using the Soft Stop option stops only the Sterling B2B Integrator
interface immediately, while all the business processes that are in progress run
until complete. After all the current business processes are completed, you will
need to perform a hard stop to fully stop Sterling B2B Integrator. To stop the
system and all the processing immediately, use the Stop the System option. All
processes that have not been completed will stop and have to be restarted.
To stop Sterling B2B Integrator using the System Troubleshooting page:
1. From the Administration menu, select Operations > System > Troubleshooter.
2. In the System Troubleshooting page, in the System Status area, click Soft Stop
(for an interactive soft stop) or Stop the System (for an immediate soft stop).
Important: A soft stop does not stop all JVMs and system processing. To fully
stop the system, you must perform a hard stop after the soft stop is complete. For
instructions, see “Hard Stop of Sterling B2B Integrator” on page 120.
Viewing the Host Information
Host Information displays the current operational status of the processing
environment for your installation of Sterling B2B Integrator. The System
Troubleshooting page displays separate information for each installation.
Note: If you are working in a clustered installation of Sterling B2B Integrator, the
information that displays is determined by the node you select from the Select
Node list.
To view Host Information:
1. From the Administration menu, select Operations > System > Troubleshooter.
100 Sterling B2B Integrator: Performance Management