Filter
Top Products
Thermal/Mechanical Specifications and Design Guidelines 111
Mechanical Drawings
Figure B-16. Heatsink Backplate Stud
A
4
B
3
C
D
43
21
A
2
C
1
D
A A
FOXHOLLOW_THICK_BP_STANDOFF
1C
DWG. NO SHT. REV
THIS DRAWING CONTAINS INTEL CORPORATION CONFIDENTIAL INFORMATION. IT IS DISCLOSED IN CONFIDENCE AND ITS CONTENTS
MAY NOT BE DISCLOSED, REPRODUCED, DISPLAYED OR MODIFIED, WITHOUT THE PRIOR WRITTEN CONSENT OF INTEL CORPORATION.
SHEET 1 OF 1DO NOT SCALE DRAWINGSCALE: 1:1
CE49063-001C
REVDRAWING NUMBERSIZE
STUD, FEMALE, M3X0.5, FOXHOLLOW
TITLE
2200 MISSION COLLEGE BLVD.
P.O. BOX 58119
SANTA CLARA, CA 95052-8119
R
EASD-SH
DEPARTMENT
SEE NOTESSEE NOTES
FINISHMATERIAL
--
DATEAPPROVED BY
--
--
DATECHECKED BY
04/10/08JUN LU
DATEDRAWN BY
04/10/08JUN LU
DATEDESIGNED BY
UNLESS OTHERWISE SPECIFIED
INTERPRET DIMENSIONS AND TOLERANCES
IN ACCORDANCE WITH ASME Y14.5M-1994
DIMENSIONS ARE IN MILLIMETERS
TOLERANCES:
.X 0.5 Angles 0.5
.XX 0.25
.XXX 0.025
THIRD ANGLE PROJECTION
PARTS LIST
DESCRIPTIONPART NUMBERITEM NOQTY
-TOP
REVISION HISTORY
ZONE REV DESCRIPTION DATE APPR
1 A INITIAL RELEASE 04/10/08 -
2 B REDEFINE THE HEIGHT OF STUD 07/15/08
3 C ADDED PLATING CORROSION REQUIREMENT 01/21/09
6
6
73.8 0.05
75.55 0.13
M3 X 0.5 INTERNAL THREAD, THRU
NOTES:
1. THIS DRAWING TO BE USED IN CONJUNCTION WITH SUPPLIED 3D DATABASE.
ALL DIMENSIONS AND TOLERENCES ON THIS DRAWING TAKE PRECEDENCE
OVER SUPPLIED DATABASE
2. PRIMARY DIMENSIONS STATED IN MILLINETERS. [BRACKETED] DIMESNIONS
STATED IN INCHS.
3. MATERIAL: STEEL, MUST MEET LOAD, TORQUE, AND FAILURE REQUIREMENTS LISTED ON
ASSEMBLY DRAWING
4. FINISH: ZINC OR ELECTROLYTIC NICKEL PLATING PLUS CLEAR CHROMATE PER ASTM B
633 COLORLESS
5. MATERIAL PROPERTIES: YIELD 235 MPA MIN ULTINATE STRENGTH 395 MPA MIN
6 FEATURE DETAIL PER MANUFACTURE SPECS.PRESS FIT FLUSH MOUNT FOR > 100 LBF
PULL OUT, AND >20 IN-LBF TORQUE TO FAILURE.
7 CRITICAL TO FUNCTION DIMENSION
8. PLATING CORROSION REQUIREMENTS:
48 HRS 85 C / 85% HUMIDITY WITH NO VISIBLE CORROSION
6
SECTION A-A
6