Filter
Top Products
Viglen SX220 User Guide 113
OpenView
The HP OpenView Network Node Manager Console automatically detects servers
running the ISC Platform Instrumentation software. ISC-enabled servers display on
the network map, and an “Intel Server Control” applet is added as an option in the
Tools menu.
Unicenter TNG
Unicenter TNG automatically detects servers running the ISC Platform
Instrumentation software if the ISC to discovery service is enabled. The service can
be started either from the Auto Discovery dialog or from the Windows NT Services
applet. The discovery service creates a new “Intel Server Control” object for each
ISC-enabled server. The ISC objects display under “ISC World View.”
Connecting to a Remote Server
There are several methods for connecting to a server for management. A key to
effective management is to configure your system with methods that will allow you to
communicate with the server in conditions ranging from fully functional to powered-
off. The available connections are:
• Telephone
• Local Area Network (LAN)
• Intelligent Chassis Management Bus (ICMB)
• Local Direct
The connection methods are described in the following paragraphs.
Telephone
A telephone/modem connection may be used to communicate with a managed
server.
A telephone connection is particularly useful when the managed server is not
communicating with the local area network, such as when the server is hung or
powered-off.
Using a telephone line to connect to an unpowered server requires that a battery-
backed-up management card be installed in the server.
From the Console
With a modem installed in both the client console system and the remote server, you
can connect to the server using DPC or Client SSU.