Intel SX220 Power Supply User Manual


 
Viglen SX220 User Guide 15
Processor
The SCB2 motherboard accommodates one or two Intel Pentium III processors with
512k cache in the FC-PGA2 package. This processor uses the 0.13 micron
technology and offers advanced performance. The processor external interface
operates at a maximum of 133 MHz.
Memory
The system board contains six 168-pin DIMM slots each supporting 72-bit ECC (64-
bit main memory plus ECC) registered SDRAM DIMMs (PC-133 compatible).
Memory is two-way interleaved and partitioned in three banks. You may install a
minimum of 128 MB (64MB x 2) and as much as 6 GB.
The controller automatically detects, sizes, and initialises the memory array,
depending on the type, size, and speed of the installed DIMMs, and reports memory
size and allocation to the server via configuration registers.
NOTE: Use DIMMs that have been tested for compatibility with the server board.
Contact your sales representative or dealer for a current list of approved
memory modules
Add-in Board Slots
The server board has two PCI riser slots, each capable of supporting 64-bit/66-MHz
PCI riser cards. PCI features:
Bus speed up to 66 MHz
32 bit memory addressing
5 V/3.3 V signaling environment
Burst transfers of up to 512 Mbps
8, 16, 32, or 64-bit data transfers
Plug and Play ready
Parity enabled