Filter
Top Products
Viglen SX220 User Guide 93
• Save: Allows you to save the configuration immediately.
• Close: Allows you to close the Emergency Management Port dialog without
saving changes. If you have made changes, you will be prompted to save
changes before closing.
Options
The Options menu has the following options:
• Clear EMP Password: Allows you to clear the currently saved EMP
password. This takes effect immediately. This option is only available if the
EMP password is set.
Help Topics
The Help Topics menu has the following options:
• Help Topics: Displays help information.
Enter New Password
Enter an EMP password. The valid range of characters includes ASCII values 32-
126.
The password must be from 1-16 characters long.
Verify New Password
Enter the same password as above.
ESC Sequence
The ESC Sequence string is sent to the modem before sending a command string to
the modem. The length of the paging string is determined at run-time from firmware.
You will be notified if the string is truncated. The string that has been saved is the
one that will be shown in the edit box.
Hangup String
The Hangup Line string is sent to the modem whenever the EMP wants to terminate
the session. The EMP automatically sends an <ENTER> character after this string.
The length of the paging string is determined at run-time from firmware. You will be
notified if the string is truncated. The string that has been saved is the one that will
be shown in the edit box.