Filter
Top Products
Viglen SX220 User Guide 97
2. Print, review, and follow the instruction.rtf file (it supercedes any other
instructions)
3. Label three blank floppy disks as follows:
• Disk 1 - SCB2 BIOS update diskette
• Disk 2 – SCB2 BMC update diskette
• Disk 3 – SCB2 FRU/SDR update diskette
4. Make the diskettes DOS bootable.
5. Record the current BIOS settings.
a. Boot the computer and press <F2> when you see the splash screen.
b. Write down the current settings in the BIOS Setup program.
NOTE: Be sure to record the current custom BIOS settings. They will be cleared and
reset to their default values during the BIOS update portion of the operation.
You will need these settings to configure your computer at the end of the
update procedure. To record the current custom settings, boot the computer
and press <F2> when you see the splash screen. Write down the current
custom settings in the BIOS Setup program
Extraction
Double click the executable file you downloaded. Read the License Agreement,
select "I Agree" to accept the terms and conditions or select "Cancel" to cancel the
installation.
During the extraction process, you will be prompted to insert each of the three
labelled diskettes. Follow the prompts until the process is completed. When
completed, you will have three diskettes that can be used to update the BIOS, the
BMC firmware, and the FRU/SDR records.
Updating
NOTE: Do not turn off the system during the update process.
Apply the updates in order by booting from each floppy diskette beginning with Disk
1.
1. Disk 1 - SCB2 BIOS update—Choose option 1 to update the system BIOS. The
system will automatically reboot following completion.
2. Disk 2 – SCB2 BMC update—Automatic, no questions are asked. The system
will notify you that it is going to reboot.