Filter
Top Products
Viglen SX220 User Guide 70
SCSI Disk Utilities Press <Enter> to view the SCSI Disk Utilities
Menu. This menu allows you to format hard
disks and/or verify disk media.
When you are finished, press <Esc> and make your selection from the following
menu:
Table 34: Exit Menu
Feature Option Comment
Exit Utility? Yes
No
When you finish configuring your SCSI devices, press <Esc>. Then select
Yes and press <Enter>. When this message appears:
Please press any key to reboot
Press any key, and the server reboots.
Running the Promise FastBuild Utility
This utility is only found on the SCB2 ATA model only.
The Promise ATA-100 host adapter is configured using the FastBuild
†
configuration
utility that allows you to configure/view the settings of the host adapter and set RAID
configurations.
When to Run the Promise FastBuild Utility
Use the FastBuild utility to:
• Define a RAID array
• Delete a RAID array
• Restore a RAID array
Running the Promise FastBuild Utility
1. When this message appears on the video monitor:
<<<Press <Ctrl><F> to enter FastBuild (TM) Utility>>>
2. Press <Ctrl+F> to run the utility.
Direct Platform Control (DPC) Console
Direct Platform Control (DPC) Console is part of Intel Server Control. Direct Platform
Control is a server management application that supports remote system
management via LAN, or an RS-232 serial connection to the server COM2 port over
a modem or a direct serial cable. The Direct Platform Control Console provides the
ability for remote management of Intel servers via modem or LAN with a capability to
run DOS-based programs.