Filter
Top Products
Viglen SX220 User Guide 56
Figure 40: Rails Fully Extended
CAUTION!
Lifting and placing the chassis in the rails is a two-person job. If needed, use an
appropriate lifting device. A fully loaded Viglen SX220 server weighs approximately
23.1 kg (51 lbs.).
2. With the chassis front facing you, lift the chassis and carefully insert the rails
attached to the chassis in the extended rails.
3. Slide the chassis toward the rear of the cabinet until the rails lock together.
4. Depress and hold down the finger tabs (Figure 41, A) on both extension locks
while sliding the chassis towards the rear.
Figure 41: Sliding the Chassis towards the rear of the Rack