Filter
Top Products
Viglen SX220 User Guide 73
What You Need to Do
You can run the SSU directly from the SCB2 Server Software Kit CD-ROM by
booting the server system to the CD and selecting “Utilities” or from a set of DOS
diskettes.
If you choose to run the SSU from a set of DOS diskettes, you must create the SSU
diskettes from the SCB2 Resource CD-ROM by booting to the CD-ROM and
selecting “Create Diskettes.” Alternatively, if you have a Windows based
workstation; you can insert the CD into that system and create diskettes from the
“Utilities” menu of the graphical user interface.
If your diskette drive is disabled, or improperly configured, you must use BIOS Setup
to enable it so that you can use the SSU. If necessary, you can disable the drive
after you exit the SSU. Information entered using the SSU overrides any entered
using BIOS Setup.
Running the SSU
Running the ssu.bat file provided on the SSU media starts the SSU. If the server
boots directly from the SSU media, the ssu.bat file automatically runs. If it boots
from a different media, you can start the SSU manually or by another application.
When the SSU starts in the local execution mode (the default mode), the SSU
accepts input from the keyboard and/or mouse. The SSU presents a VGA based
Graphical User Interface (GUI) on the primary monitor.
The SSU runs from writable, non-writable, removable, and non-removable media. If
you run the SSU from non-writable media, you cannot save user preference settings
(such as screen colours).
The SSU supports the ROM-DOS
®
V6.22 operating system. It may run on other
ROM-DOS-compatible operating systems but they are not supported. The SSU will
not operate from a “DOS box” running under an operating system such as Windows.
Starting the SSU
SSU consists of a collection of task oriented modules plugged into a common
framework called the Application Framework (AF). The Application Framework
provides a launching point for individual tasks and a location for setting
customisation information. For full functionality, the SSU requires the availability of
the AF.INI, AF.HLP, plus any .ADN files and their associated .HLP and .INI files.
1. Turn on your video monitor and your system.
2. There are two ways to start the SSU: