Filter
Top Products
5-9. E-mail Receive (POP) Configuration
111 II Network Setup - Administrators only
Chapter 5 Web Utility
Changing E-mail Receive (POP) Setting
The following E-mail Receive (POP) settings may be changed as noted.
Enable POP
POP Server Address
POP Server Port Number
Login Name
Password
POP Server Connection Timeout
Interval Time
To alter any of these E-mail Receive (POP) settings, follow these steps:
1 Open the E-mail Receive (POP) configuration page.
2 In the E-mail Receive (POP) Settings section, select the field you wish to change.
3 Enter the new settings.
4 At the bottom of the page, type in the system password in the provided field.
5 Click [Apply].
● Changes do not take effect until you start the copier. Be sure to wait at least 10 seconds after turning off
the main power switch before you turn the copier back on.