Konica Minolta Konica 7222 All in One Printer User Manual


 
4-4. NetWare Setup
35 II Network Setup - Administrators only
Chapter 4 Setting from the Control Panel
NetWare setup (Part 1 of 3)
1 Access to [NetWare Setup] screen (1/3) from [Network setting] screen.
zFor details on the procedure for displaying the [Network setting] screen, refer to [4-2.Method for Setting Network from
Control Panel] ( Page 23).
zUse [ ] and [ ] to switch the screen.
Enable NetWare
This sets whether or not to enable the machine’s NetWare capabilities in the network environment.
1 To disable NetWare settings, touch the [OFF] key. To enable them touch the [ON] key.
[ON] :Used in the NetWare environment
[OFF] :Not used in the NetWare environment
Ethernet Frame Type
This sets the frame type used by the machine.
1 Touch the [EDIT] key on the [Ethernet Frame Type] screen.
[EDIT] :Choose from below
[Auto-Sense][802.2][802.3][Ethernet II][802.2 SNMP][Auto-Sense]
zThe factory default setting is [Auto-Sense].
2 Touch [OK] key.
Print Server Name
This sets the Print Server name assigned to the Network Controller.
1 Touch the [Print Server Name] key.
2 Using the [Data Input] screen, input the Print Server name.
3 Touch [OK] key.
The screen will return to [NetWare Setup].