Konica Minolta Konica 7222 All in One Printer User Manual


 
4-14. LDAP Setup
87 II Network Setup - Administrators only
Chapter 4 Setting from the Control Panel
Condition
Select the default settings for the condition when performing a detailed search.
1 Touch [Condition] for [Item 1] - [Item 4] on the touch panel.
The condition selection screen is displayed.
2 Touch the items used for the condition on the touch panel.
3 Touch the [OK] key on the condition selection screen.
Factory defaults for detailed search initial setting are set as follows:
Item Attribute Condition
Item 1 Common name OR
Item 2 E-Mail address OR
Item 3 TEL/FAX number OR
Item 4 Organization OR