Filter
Top Products
6-1. Selecting the Destination
147 III Scanner
Chapter 6 Using the Scanner Functions
3 Input the file name for the scan data.
zThe default file name is Scan****.
On the actual display, the asterix (****) will be replaced by the total number of scans (0001-9999) performed since the
machine has been turned on.
zUp to 26 half-width characters (13 full-width characters) can be input as a file name.
For details on character input, refer to [3-1. Inputting Text] ( Page 16).
zThe filename extension [.tif] or [.pdf] is added automatically to the filename.
4 Touch the [OK] key.
→ The display returns to the [Scanner mode basic] screen.
5 Touch the [Enter address] key.
→ The [PC(SMB) Input] screen is displayed.
6 Touch the [Host Name] key.
→ The [Data Input] screen is displayed.
7 Input the name of PC to which data is to be sent.
zUp to 15 characters can be entered for [Host Name] using alphanumerics or symbols.
zInput [Host Name]for the computer name using Windows.
8 Touch the [OK] key.
→ The [PC(SMB) Input] screen is displayed.
9 Touch the [Folder] key.
→ The [Data Input] screen is displayed.