Filter
Top Products
4-3. TCP/IP Setup
29 II Network Setup - Administrators only
Chapter 4 Setting from the Control Panel
Default Gateway
This inputs the gateway for the machine’s network.
1 Touch the [Default Gateway] key.
2 Use the keys on the control panel to input the default gateway address.
Specify four sets of three digit numbers, separated by the periods as the default gateway address.
When you touch [] or [] the cursor moves to the left and right.
zWhen using a DHCP server for default gateway address management, the default gateway address acquired with
DHCP is displayed.
Enable DHCP
This sets whether or not to automatically acquire IP Addresses and other such information from a
DHCP (Dynamic Host Configuration Protocol) server.
1 Touch the [ON] or [OFF] key on the [Enable DHCP Setting].
[ON] :When acquiring information from a DHCP server
[OFF] :When not acquiring information from a DHCP Server
zThe factory default setting is [ON].