Konica Minolta Konica 7222 All in One Printer User Manual


 
8-2. Scanner Initial Settings
203 IV Scanner Key Operator - Administrators only
Chapter 8 Key Operator Settings
Scan Density
This sets the scanning density.
zThe factory default is [AUTO].
1 Select [Scan Density] in [Initial setting] screen.
When you touch the [ ] or [ ] key, the selection item is switched.
zFor details on the procedure for displaying the [Initial setting] screen, refer to [Switching the Key Operator Mode]
( Page 190).
2 Touch the [EDIT] key, then change the setting.
Each time you touch the [EDIT] key, the setting is switched.
AUTO 1 2 3 4 5 (NORMAL) 6 7 8 9
3 Touch the [RETURN] key.
From now on, the copier operates in accordance with this settings.