Filter
Top Products
7-2. Network Error List
III Scanner 184
Chapter 7 When There is Trouble with the Scanner
Error Code Recommended Troubleshooting
N-53 Check the network cable connection
N-54
1) Check the network cable connection
2) Check the SMTP server address and port number under E-Mail (SMTP) set-
tings
3) Check the POP server log-in name and password under E-Mail (POP) set-
tings when the SMTP server supports the POP before SMTP setting
4) Check the status of the SMTP Server
5) Check the free space of SMTP Server
N-55 Check the network cable connection
N-56 Check the network cable connection
N-57
1) Check the free space of SMTP Server
2) Try again later to start the network system because the same account of the
POP server might be receiving the E-Mail
N-58 Check the network cable connection
N-59 Check the status of SMTP Server
N-60
1) Check that the POP before SMTP setting is active under the E-Mail (SMTP)
menu
2) Check that the POP before SMTP set time is shorter than the set holding time
for the POP server
N-61
1) Check that the Binary Division function is activated under the E-Mail (SMTP)
Menu
2) Reduce the Binary Division data size under the E-Mail (SMTP) Menu
3) Check the status of the SMTP Server
4) Check the max. Binary Division data size under the E-Mail (SMTP) Menu
N-62 Wait and try again later
N-63
1) Check that the Binary Division function is activated under the E-Mail (SMTP)
Menu
2) Change the SMTP server capacity under the E-Mail (SMTP) settings
3) Check the free space of SMTP Server
N-64 Turn the main power switch OFF and then ON again
N-65 Contact your local service representative
N-66 Check the From: address settings
N-70 Wait and try again later
N-71 Wait and try again later
N-72 Check the search route for LDAP Setup
N-73
Select [LDAP search (detail)], then increase the search condition and execute
again
N-74
1) Check the settings for the LDAP server
2) Check each setting item for LDAP Setup
N-75
1) Check the settings for the LDAP server
2) Check each setting item for LDAP Setup
N-76
1) Check the connection of the network cable
2) Check the status of the LDAP server
N-77
1) Check the setting for the LDAP server
2) Check each item of the LDAP settings
N-80 Check the file name and the destination FTP server
N-81
1) Check the network cable connection
2) Check the destination FTP server address and port number
3) Check the status of the destination server