Konica Minolta Konica 7222 All in One Printer User Manual


 
5-12. LDAP Configuration
115 II Network Setup - Administrators only
Chapter 5 Web Utility
3 Enter the following items.
Enable LDAP
LDAP Server Address
LDAP Server Port Number
Enable SSL
Search Root
Connection Timeout
Maximum Hit Number
Authentication Type
Dynamic Authentication
User Name
Password
Domain Name
4 Input the password and click the [Apply] button.
This password is a key operator password.
Clicking [Clear] aborts all settings input up to this point.
5 Input the password and click the [Check LDAP Setting] button.
This password is a key operator password.
When the settings are entered correctly, a message confirming a successful connection is displayed.
When the connection has failed, check the settings for each item and re-enter the data.
Changes do not take effect until you start the copier. Be sure to wait at least 10 seconds after turning off
the main power switch before you turn the copier back on.