Filter
Top Products
4-8. E-Mail (SMTP) Setup
II Network Setup - Administrators only 58
Chapter 4 Setting from the Control Panel
E-Mail (SMTP) Setup (Part 1 of 2)
1 Access to [E-Mail (SMTP) Setup] screen (1/2) from [Network Setting] screen.
zFor details on the procedure for displaying the [Network setting] screen, refer to [4-2.Method for Setting Network from
Control Panel] ( Page 23).
zUse [ ] and [ ] to switch screens.
Enable SMTP
This sets whether or not to enable the machine’s E-Mail capabilities.
1 Touch either the [ON] or [OFF] key on the [Enable SMTP] menu.
[ON] :Enables the E-Mail capability
[OFF] :Disables the E-Mail capability
SMTP Server
This sets the name of the SMTP server used for sending E-mail.
1 Touch the [SMTP Server] key.
2 Using the [Data Input] screen, input the name or IP address of the SMTP server used for
sending E-mail.
● Unless the DNS settings are made correctly, the system will not operate correctly even if the SMTP
server name is entered.
zThe SMTP server name is a combination of up to 239 symbols and alphanumerics.
zFor details on character input refer to [3-1.Inputting Text] ( Page 16).