Filter
Top Products
5-6 Troubleshooting
Paper capacity exceeded.
(Finisher)
Remove paper, and press Start
key.
During copying, is the maximum
capacity of the optional
document finisher output tray
exceeded?
Remove some pages from the
optional document finisher and
press the Start key. Printing
continues.
—
Paper capacity exceeded.
(Finisher)
Remove paper, and press
Continue key.
During printing, is the maximum
capacity of the optional
document finisher output tray
exceeded?
Remove some pages from the
optional document finisher and
press [Continue]. Printing
continues.
—
Remove paper. Finisher tray. Is the maximum capacity of the
optional document finisher
output tray exceeded?
Remove some pages from the
optional document finisher.
—
These functions cannot be
combined.
Have you selected functions
that cannot be used together?
Check the settings. —
Exceeds pre registered copying
quantity.
(Copy limit for this ID-code has
been reached.
No copying possible.)
Is the maximum limit for copying
as specified in Job Accounting
mode exceeded?
The copy volume has been
reached the set limit of your
department. No additional
copying is possible. Clear the
copy count in Job Accounting.
page 4-11
Insert key counter. Is the optional key counter
inserted correctly?
Insert the optional key counter
securely and completely.
—
Memory full. — The current copy cannot be
processed because there is no
more copy memory free space,
or the number of original pages
exceeded the maximum 999
pages. When the following
message is displayed select the
resolution method.
[Cancel]: Cancels copying.
[Continue]: Copies up to the last
scanned page.
—
Toner will be empty soon. — The toner container will need to
be replaced soon. Prepare the
replacement toner container.
Refer to Operation
Guide, Chapter 5
Ready to copy.
Add toner.
— Remaining toner is low, so only
one page may be printed at a
time. Prepare the replacement
toner container.
Refer to Operation
Guide, Chapter 5
Add toner. — Replace the toner container. Refer to Operation
Guide, Chapter 5
Set the toner container. Is the toner container securely
installed?
Open the front cover and pull
the toner container out. Shake
the container well and set back
in place.
Refer to Operation
Guide, Chapter 5
Clean the main charger. Have you cleaned the main
charger?
Clean the main charger after
replacing the toner container.
After cleaning, press [End].
Adjustment begins. Wait 5
minutes.
Refer to Operation
Guide, Chapter 5
Image cycle.
(Now adding toner.)
— Toner replenishment is in
progress. Wait until the process
is completed.
—
Please wait.
Now in the fusing temperature
adjustment process
— Performing internal
maintenance. Wait until the
process is completed.
—
Display Checkpoints Corrective Actions Reference Page