Filter
Top Products
System Menu 3-9
2 Press [S] or [T] to select Default margin width and press [Change
#].
3 Press [S], [T], [W] or [X] to set the margin width.
4 Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Copy Default screen.
Erasing Borders
Set the border erase default values. The setting ranges are as follows.
For further details about border erase, refer to page 1-14.
1 Referring to Accessing the Copy Default screen on page 3-2, access
the Copy Default screen.
2 Press [S] or [T] to select Default erase width and press [Change #].
3 Press [+] or [–] to set the Border (outer edges) and Gutter (middle)
border widths.
4 Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Copy Default screen.
Selecting Maximum Number of Copies
Limits the number of sets that can be specified for a single copy. Set to
between 1 - 999 sets.
1 Referring to Accessing the Copy Default screen on page 3-2, access
the Copy Default screen.
2 Press [S] or [T] to select Preset limit and press [Change #].
3 Use the numeric keys to specify the preset limit value.
4 Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Copy Default screen.
Enabling Repeat Copy
Disable repeat copy or configure repeat copy in the default settings
mode. The setting items are as follows.
For further details about repeat copy, refer to page 1-25.
1 Referring to Accessing the Copy Default screen on page 3-2, access
the Copy Default screen.
2 Press [S] or [T] to select Repeat Copy and press [Change #].
3 Under Function, select [Off] or [On].
4 Under Default, select [Off] or [On].
Model Type Range
Inch models 0
- 2" (1/8" increments)
Metric models 0 - 50 mm (1 mm increments)
Item Description
Function Off Prevents the use of repeat copy.
On Allows the use of repeat copy.
Default Off Do not enable repeat copy.
On Enable repeat copy.