Filter
Top Products
Copy Functions 1-15
3 Press [Border Erase].
4 Press [Book Erase].
5 Press [+] or [–] to set the Border (outer edges) and Gutter (middle)
border widths.
With metric models, you can enter the border width directly using the
numeric keys by pressing [#-Keys].
6 Press the Start key. Copying begins.
Separate Border Erase
Follow the steps as below to erase the black borders specifying the width
of the borders individually.
1 Place the original so the top edge is aligned with the back or left of
the platen.
2 Press [Function].
3 Press [Border Erase].
4 Press [Individual BordrErase].
5 Depending on orientation of the placed original, select [Top Edge
Top] or [Top Edge Left] from Select Original Orientation.
6 From [Top], [Bottom], [Left] and [Right], select the desired border to
adjust the border width.
7 Press [+] or [–] to set the border erase width.
With metric models, you can enter the border width directly using the
numeric keys by pressing [#-Keys].
8 Press [Close]. To specify widths of other borders to erase, repeat
steps 6 - 8.
9 Press the Start key. Copying begins.
Border Erase
Off
Ba
Individual
BordrErase
Border
Bord Erase
Sheet
Book
Erase
Gutter
(0~2)
""
Ready to copy.
¼½
(0~2)
Shortcut
Ba
Sel
e
Off
Ori
e
Bottom
Border Erase
Left
Top
Right
Book
Erase
Individual
BordrErase
Bord Erase
Sheet
¼ " ¼ "
¼ " ¼ "
Ready to copy.
Shortcut
T
o
T
o
Ba
Sel
e
Ori
e
Individual Border Erase
Top
(0~2)
"
Ready to copy.
¼
T
o
T
o