Filter
Top Products
3-8 System Menu
4 Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Copy Default screen.
Selecting Collating and Offsetting Output
Set collating and offsetting output options in default settings mode. The
setting items are as follows.
For further details about collate mode, refer to Operation Guide; for
further details about offset mode, refer to page 1-7.
1 Referring to Accessing the Copy Default screen on page 3-2, access
the Copy Default screen.
2 Press [S] or [T] to select Collate/Offset and press [Change #].
3 Under Collate, select [Off] or [On].
4 Under Offset, select [Off] or [On].
5 Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Copy Default screen.
Selecting Auto Image Rotation
Set auto image rotation in default settings mode. The setting items are
as follows.
For further details about auto image rotation, refer to page 1-27.
1 Referring to Accessing the Copy Default screen on page 3-2, access
the Copy Default screen.
2 Press [S] or [T] to select Auto Image Rotation and press [Change
#].
3 Select [Off] or [On].
4 Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Copy Default screen.
Setting Margin Defaults
Set the margin width default values. The setting ranges are as follows.
For further details about margin mode, refer to page 1-12.
1 Referring to Accessing the Copy Default screen on page 3-2, access
the Copy Default screen.
Item Description
Collate Off Do not enable collate mode.
On Enable collate mode.
Offset Off Do not enable offset mode.
On Enable offset mode.
Item Description
Off Do not enable auto image rotation.
On Enable auto image rotation.
Model Type Range
Inch models 0
- 3/4" (1/8" increments)
Metric models 0 - 18 mm (1 mm increments)