Filter
Top Products
1-34 Copy Functions
Job Build
Job Build allows you to scan originals in several separate steps and copy
at once. In each step of the scanning process you can specify different
settings (such as zooming and border erase) and you can specify
different types of originals. Other examples include inserting a blank
sheet between sets of copies from each step and specifying a front cover
page during a duplexing step.
Job Build Procedure
This procedure describes how to use a job build for the following
example.
Example
<Finished Copies>
Pages marked with * are blank, pages shown in gray are colored paper.
<Originals>
Open the Job Build Screen. Step 1:
1 Press the Job Build key.
Settings Common to All Steps
Sets Duplexing and Repeat Copy.
2 Press [1 sided/2 sided] ([1-sided/2-sided]).
Note In this example, color paper to be used for the cover page is
set in the MP tray and regular paper is loaded in Cassette 1.
Note Set Repeat Copy to increase number of sets later as
needed.
Other settings not used in this example may also be configured
here. For further details, refer to Setting Functions on page 1-37.
Place originals then press Start key.
Job Build
Ready to Job build.
11×8½"
Paper
1 sided
Original
Basic Quality
Zoom
Top Edge Top
Finished
1 sided/
2 sided
Original
Orient.
1 sided Copy
Edit
1 sided copy-Left
Finished page #:
Step
Auto %
-
Offset
Selection Type