Filter
Top Products
Copy Functions 1-41
Margin/Centering
Set margin (blank borders) and centering options.
1 Press [Edit] and on the next screen press [Margin/Centering].
2 Press [Margin] or [Centering]. For further details, refer to Margin
Mode on page 1-12 and Centering Originals on page 1-13.
3 Press [Close].
Page Numbering
Specify page numbering in the sequence of originals as follows.
1 Press [Edit] and on the next screen press [Page #] ([Page
numbering]).
2 For further details about page numbering, refer to Page Numbering
on page 1-16.
3 Press [Close].
Selecting Output Destination
The optional job separator, document finisher or built-in finisher can be
specified as copy output destinations.
1 Press [Edit] and on the next screen press [Output Tray].
2 Specify the output destination. For further details, refer to Selecting
Output Destination on page 1-28.
3 Press [Close].
Note Margin/Centering setting is common to all steps. It may
only be configured as the first step.
Note Page numbering configuration is common to all steps. It
may only be configured as the first step.
Note Output destination is displayed with the optional job
separator, document finisher or built-in finisher is installed.
The output destination setting applies to all other steps. It may
only be configured as the first step.