Filter
Top Products
̈ Chapter 11: Wireless LAN – WLAN LANCOM Reference Manual LCOS 3.50
237
Wireless LAN – WLAN
Configuration with
LANconfig
For configuration with LANconfig you will find the protocol filter under the
configuration area 'WLAN Security' on the 'Protocols' tab.
Make an entry in the protocol list for each protocol that requires special
handling. Enter the following values:
̈ A name of your choice for the filter entry
̈ Protocol number, e.g. '0800' for IP. If no protocol is entered, the filter will
be applied to all packets.
̈ Subprotocol, e.g. '6' for TCP. If no subprotocol is entered, the filter will be
applied to all packets of the entered protocol.
̈ Port start and port end, e.g. each '80' for HTTP. If no ports are entered,
then this filter will be applied to all ports of the appropriate protocol/
subprotocol.
Lists of the official protocol and port numbers are available in the
Internet under www.iana.org.
̈ Action for the data packets:
୴ Let through
୴ Reject
୴ Redirect (and state the target address)
̈ List of interfaces that the filters apply to