Filter
Top Products
̈ Chapter 6: Security LANCOM Reference Manual LCOS 3.50
55
Security
̈ Lock configuration for (
Lock-minutes
)
6.1.3 Restriction of the access rights on the configuration
Access to the internal functions of the devices can be restricted separately for
each access method as follows:
̈ ISDN administrative account
̈ Network
୴ LAN
୴ WAN
For network-based configuration access further restrictions can be made, e.g.
that solely specified IP addresses or dedicated LANCAPI clients are allowed to
do so. Additionally, all internal functions are separately selectable.
The term ’internal function’ denotes configuration sessions via LANconfig
(TFTP), WEBconfig (HTTP, HTTPS), SNMP or Terminal/Telnet.
Restrictions on the ISDN administrative account
This paragraph applies only to models with ISDN interface.
Configuration tool Run
LANconfig Management ̈ Security
WEBconfig Expert Configuration ̈ Setup ̈ Config-module
Terminal/Telnet
Setup/Config module