Filter
Top Products
̈ Chapter 3: Configuration and management LANCOM Reference Manual LCOS 3.50
25
Configuration and manage-
ment
monitor. If the configuration of the device is protected by password, enter
the password too.
Alternatively, you can select the device via the LANconfig and monitor it
using Tools / Monitor Device.
ባ LANmonitor automatically creates a new entry in the device list and ini-
tially displays the status of the transfer channels. Start your Web browser
and enter any web page you like. LANmonitor now shows a connection
being established on one channel and the name of the remote site being
called. As soon as the connection is established, a plus sign against the
communication channel entry indicates that further information on this
channel is available. Click on the plus sign or double-click such entry to
open a tree structure in which you can view various information.
In this example, you can determine from the PPP protocol information the
IP address assigned to your router by the provider for the duration of the
connection and the addresses transmitted for the DNS and NBNS server.
Under the general information you can watch the transmission rates at
which data is currently being exchanged with the Internet.
ቤ To break the connection manually, click on the active channel with the
right mouse button. You may be required to enter a configuration pass-
word.
ብ If you would like a log of the LANmonitor output in file form, select
Device ̈ Properties and go to the 'Logging' tab. Enable logging and