Filter
Top Products
̈ Chapter 7: Routing and WAN connections LANCOM Reference Manual LCOS 3.50
89
Routing and WAN
connections
When starting a new entry under WEBconfig, the NAT table shows up as fol-
lows:
7.5 Configuration of remote stations
Remote stations are configured in two tables:
̈ In the name list(s) all information is set that applies individually to only
one remote station.
̈ Parameters for the lower protocol levels (below IP or IPX) are defined in
the communication layer table.
The configuration of the authentication (protocol, user name, pass-
word) is not covered in this section.Information on authentication is
contained in the section ’Establishing connection with PPP’
→page 91.
7.5.1 Name list
The available remote stations are created in the name list with a suitable name
and additional parameters.
Configuration tool Menu/table
LANconfig Communication ̈ Remote sites ̈ Name list
WEBconfig Expert configuration ̈ Setup ̈ WAN module ̈ Name-list
Terminal/Telnet
cd /Setup/WAN module
set name list[...]