Filter
Top Products
Dial Registration
Enhanced Utilities 6 - 11
•
Upon connection to the destination, the document is transmitted.
•
The document transmission sequence is repeated for the number of destinations
registered in that particular group.
3
To stop the transmission, press the “Stop” key, and then the "Yes" key.
4
When the transmission is completed, a buzzer sounds once and a message indicating that
the transmission has been normally completed appears and remains shown for two seconds
•
The initial screen is displayed.
•
TX Result Report is starting print.
If the Line is busy:
•
If the line of a particular party is busy, the machine puts that party at the end of the
transmission sequence.
•
When the initial transmission attempts are completed for all destinations, the machine
redials the destinations that were busy previously, for transmission of the document.
If the Transmission was Unsuccessful:
•
If the fax failed in transmitting the document to a destination, a buzzer sounds
intermittently for two seconds and the Error indicator lights up.
•
It then prints a TX/RX Result Report automatically. For details, see "TX/RX Result
Report.
•
Then it redials to the destination again, until it has successfully transmited or it has
already redialed 9 times.