Filter
Top Products
Troubleshooting
12 - 4 Service and Supplies
Improving Image Quality
* RESERV. JOB IS FULL * You cannot make a
transmitting reservation of
a document because the
number of reservations is
more than the maximum 20
allowed.
(Up to 20 transmitting
reservations can be
registered.)
You may make the Manual
transmission.
You make a transmitting
reservation for a document
after transmitting the
reserved document.
Cancel the transmitting
reservation of a document
stored in memory by using
"5.8 Cancel reserve" and
you make it again.
Symptom Possible cause What to do
The image is too light. A lighter density level for
the Auto Density Mode has
been specified.
Adjust the auto density
level priority to darker level.
A lighter density level for
the Manual Density Mode
has been specified
Adjust the density level to
darker, using the density
adjustment keys.
The paper is damp. Replace the paper.
The image is too dark. A darker density level for
the Auto Density Mode has
been specified
Adjust the auto density
level priority to lighter.
A darker density level for
the Manual Density Mode
has been specified.
Adjust the density level to
darker, using the density
adjustment keys.
The surface of the original
glass is dirty.
Wipe the original glass
clean with a soft cloth.
The original document is
not securely placed upon
the original glass.
Place the original document
securely on the exposure
glass and close the cover.
The copy appears blurred. The paper is damp. Replace the paper.
The copy has unintended
specks or spots.
The surface of the original
glass is dirty.
Wipe the original glass
clean with a soft cloth.
Auto/
Photo
Auto/
Photo