Filter
Top Products
Machine Settings
7 - 4 Enhanced Programming
Setting POWER SAVE OFF
This function allows the user to Power Save OFF, if you enable this setting the machine
will not automatically enter power saving mode at a specified time.
1
Press the "Program" key then the message MACHINE SETTING appears.
2
Press "3"on the keypad. The message “3 POWER SAVE OFF” is displayed briefly
to confirm your selection.
3
Press the "Left" or "Right Arrow" keys to select Disable or Enable as the default
setting. Then press "Yes" key.
4
Press the "No/Clear" key, to return to the initial state.
Setting PRINT DENSITY
Set the print density according to your needs. There are seven density levels ranging from
Light to Dark.
1
Press the "Program" key.
The message MACHINE SETTING appears.
2
Press "4"of Keypad.
A message appears briefly to confirm your selection.
3
Press "Left" or "Right Arrow" keys to select the desired default density setting.
4
Press "Yes" key
5
Press "No/Clear" key, to return to the initial state.
Setting LCD CONTRAST
Set the contrast of the Mesage Display according to your needs. There are four density
levels ranging from Light to Dark.
1
Press the "Program" key. Then the message MACHINE SETTING appears.
2
Press "5" of Keypad. The message “5 LCD CONTRAST” is displayed briefly to
confirm your selection.
3
Press the Arrow keys to select the desired contrast as default setting. Then press the
"Yes" key.
4
Press "No/Clear" key, to return to the initial state.