Filter
Top Products
Using Print Mailbox RX Function
Function Utilities 5 - 13
Using Print Mailbox RX Function
1) Registering Mailbox Password
1
Press the "Program" key 5 times, the message RX OPERATIONS? is displayed.
2
Press ‘5’ of the Keypad to select “MAILBOX RX’.
3
Enter the number (0-9) to take your mailbox number. (For example press ‘9’)
4
The display prompts you to input the password of Mailbox 9.
•
If you want to correct this entry, press the "No/Clear" key and enter the password again.
5
Press the "Yes" key. The Mailbox registration is complete.
2) Changing Mailbox Password
1
Press the "Program" key 5 times.
2
Press ‘5’ of the Keypad to select "MAILBOX RX".
3
Select a Mailbox number to delete using the Keypad.
4
The message “REGISTERED! KEEP? is displayed.
5
Press the "No/Clear" key to delete the registered password, then the display appears the
message as below.
6
Enter the currently password of Mailbox 9 with the Keypad.
(If you don’t know the password, you cannot delete the password.)
7
Press the "Yes" key.
•
If the password you entered is correct, then the password of this mailbox is deleted.
•
The display returns to the display of step 3.
•
If the entered password does not correspond to a mailbox, this password cannot be
deleted.
The display returns to the display of step 5.
8
If you have completed this operation, exit this setting by the flowing procedure:
•
Press the "No/Clear" key.
•
Press the "Yes" key.