Filter
Top Products
PCL4
Printer 11 - 1
PCL4
This allows users to select PCL4 printer emulation which supports 300 dpi. If the Message Display
shows, “PCL4/GDI CHANGE, RESTART YOUR FAX” to allow memory reallocation (refer to
Memory required for printer”). It is necessary to turn the power OFF to the fax machine.Then turn
the power back ON (wait approximately 6 seconds before turning unit back ON).
Note: Please be sure to print (clear) any documents from Fax memory before
selecting PCL4.
1
Press the PROGRAM key and scroll through the
menus until you reach the Set Printer menu and
press YES.
2
Press 7 or scroll down to the PCL4 Enhance menu
and press YES.
3
Select either ON or OFF depending on your needs.
Press YES to accept this data into memory.
4
If you chose YES, you must restart your unit to
make this change active.
SET PRINTER?
YES / or 1-8
7 PCL4 ENHANCE?
OK=YES
ON *OFF
-SELECT&PUSH”YES”-
PCL4/GDI CHANGE
RESTART YOUR FAX