5: Configuration Using Telnet or Serial Port
XPort AR User Guide 102
Parity odd
Set the XPort AR’s parity to odd.
Show
Display the XPort AR’s settings.
Show command mode
Show Command Mode settings.
Show line
Show line settings.
Show statistics
Show line statistics.
Shutdown
Disables the interface.
Speed <baud>
Set the XPort AR’s speed to values between 300 and 230400.
Speed custom <baud>
Set the XPort AR’s speed to values between 300 and 230400.
Stopbits 1
Set the XPort AR’s stop bit to 1.
Stopbits 2
Set the XPort AR’s stop bit to 1.
Tunnel 1
Displays the Tunnel 1 menu level. For more information on tunneling, see Tunneling
on page 120.
Write
Stores and apply current configuration into permanent memory.