5: Configuration Using Telnet or Serial Port
XPort AR User Guide 95
Short name <name>
Set the XPort AR’s short name, displayed in Command Mode and the Web Manager.
The string is a maximum 8 characters.
Show
Displays system information.
Show buffer pool
Displays information on buffer pools.
Show hardware information
Display the hardware information for the XPort AR. Shows the CPU type, CPU
speed, Hardware ID, flash size, RAM size, and hard drive size.
Show history
Display previously-entered commands.
Show memory
Prompt displays:
This command will affect the performance of tunneling. Continue
(yes/no)?
Reply yes. System displays the following info (in both the main heap and internal
buffer heap): Total memory, available memory, number of fragments, and allocated
blocks.
Show XPort
Displays the XPort AR’s system information.
Write
Store and apply current configuration into permanent memory.
DVT
Note: The DVT commands in this level will may affect the performance of the
system. If tunneling is active, characters may be lost.
Dvt all <hardware id> <host> <port>
Configure non-destructive DVT.