Lantronix XPort AR Network Card User Manual


 
5: Configuration Using Telnet or Serial Port
XPort AR User Guide 111
Connect protocol ssh
Use SSH for connect mode.
Connect protocol tcp
Use TCP for connect mode.
Connect protocol tcp aes
Use AES over TCP for connect mode.
Connect protocol udp
Use UDP for connect mode.
Connect protocol udp aes
Use AES over UDP for connect mode.
Connect reconnect timer <milliseconds>
Set the reconnect time value in milliseconds.
Connect remote <host>
Set the remote address in which to connect.
Connect remote port <number>
Set remote port.
Connect ssh username <string>
Set the SSH user information.
Connect start character
Enable connect mode on reception of the start character.
Disconnect dsr inactive
Enable disconnect mode to disconnect if DSR not asserted.
Disconnect flush serial data
Flush serial data buffer upon disconnection.