Lantronix XPort AR Network Card User Manual


 
4: Configuration Using Web Manager
XPort AR User Guide 40
CPM: Groups
The CP Groups page allows for the management of CP groups. Create a CP group
and add CPs to it. A group, based on its state, triggers outside events (such as
sending email messages). Only an enabled group can be used as a trigger.
To configure the XPort AR’s CP groups:
1. Click CPM Æ Groups from the navigation menu. The CPM: Groups window
displays.
Figure 4-24. CPM: Groups
2. The Current Configuration table displays the current settings for each CP group:
Current Configuration
Group Name
Displays the CP group’s name.
State
Indicates whether the group is enabled or disabled.
CP Info
Provides CP group information.
3. To display the status of a specific group, click the CP group name under the
Current Configuration table. The Group Status table displays, providing detailed
information about the CP group.
Group Status
Name
Displays the CP Group name.
State
Current enable state of the CP group.
Note: Peripheral pins are locked.