Filter
Top Products
4: Configuration Using Web Manager
XPort AR User Guide 25
2. Enter or modify the following fields:
TFTP
TFTP Server Select On to enable the FTP server.
Allow TFTP File Creation
Enable the automatic creation of files stored by the TFTP
server.
3. In the Current TFTP Configuration and Statistics table, reset currently stored
fields as necessary by clicking the Reset link.
4. Click Submit. Changes are applied immediately to the XPort AR.
IP Address Filter
The IP address filter specifies the hosts and subnets permitted to communicate with
the XPort AR.
Note: If using DHCP/BOOTP, ensure the DHCP/BOOTP server is in this list.
To configure the IP address filter:
1. Click Network Æ IP Address Filter from the navigation menu. The IP Address
Filter window opens to display the current configuration.
Figure 4-9. IP Address Filter Configuration
2. Enter or modify the following fields:
IP Address
Enter the IP address to add to the IP filter table.
Network Mask
Enter the IP address’ network mask in dotted notation.
3. In the Current State table, click Remove to delete fields as necessary.
4. Click Submit. Changes are applied immediately to the XPort AR.
Query Port
The query port (0x77FE) is used for the automatic discovery of the device by the
DeviceInstaller utility. Only 0x77FE discover messages from DeviceInstaller are