Filter
Top Products
4: Configuration Using Web Manager
XPort AR User Guide 48
Figure 4-31. Command Line Interface Configuration
2. Enter or modify the following fields:
Telnet Access Select On to enable Telnet access. Telnet is enabled by
default.
Telnet Port
Enter the Telnet port to use for Telnet access. The default is
23.
SSH Access Select On to enable SSH access. SSH is enabled by default.
SSH Port
Enter the SSH port to use for SSH access. The default is 22.
Password
Enter the password for Telnet access.
Enable Password
Enter the password for access to the Command Mode Enable
level. There is no password by default.
3. Click Submit. Changes are applied immediately to the XPort AR.
HTTP Settings
Hypertext Transfer Protocol (HTTP) is the transport protocol for communicating
hypertext documents on the Internet. HTTP defines how messages are formatted and
transmitted. It also defines the actions Web servers and browsers should take in
response to different commands.
Select the HTTP link on the left menu bar to display the HTTP menu. The sub-
menus allow for HTTP configuration, HTTP authentication administration, or RSS
configuration.
To view HTTP statistics:
1. Click HTTP Æ Statistics from the navigation menu. The HTTP Statistics window
displays.