Lantronix XPort AR Network Card User Manual


 
5: Configuration Using Telnet or Serial Port
XPort AR User Guide 90
No ip default-gateway
Remove the default gateway.
Show
Show interface settings.
Show history
Display previously-entered commands.
Show ip address filter
Display the IP filter table.
Speed 10
Set the Ethernet link to 10 Mbps (duplex is unchanged).
Speed 10 full
Set the Ethernet link to 10M bps (full-duplex).
Speed 10 half
Set the Ethernet link to 10 Mbps (half-duplex).
Speed 100
Set the Ethernet link to 100 Mbps (duplex is unchanged).
Speed 100 full
Set the Ethernet link to 100 Mbps (full-duplex).
Speed 100 half
Set the Ethernet link to 100 Mbps (half-duplex).
Speed auto
Set the Ethernet link to auto-negotiation.
Write
Store and apply current configuration into permanent memory.