Filter
Top Products
4: Configuration Using Web Manager
XPort AR User Guide 41
Value
Displays the CP group’s current value.
Bit
Visual display of the 32 bit placeholders for a CP.
I/O
A “+” symbol indicates the CP’s bit position is asserted (the
voltage is high). A “-“ indicates the CP voltage is low.
Logic
An “I” indicates the CP is inverted.
State
Displays the assertion value of the corresponding bit.
CP#
Displays the Configurable Pin number and its bit position in
the CP group.
2. To create a CP group:
a) Enter a group name in the Create Group field.
b) Click Submit. Changes are applied immediately to the XPort AR.
3. To delete a CP group:
a) Select the CP group from the Delete Group drop-down list.
b) Click Submit. Changes are applied immediately to the XPort AR.
4. To enable or disable a CP group:
a) Select the CP group from the Set drop-down list.
b) Select the state (Enabled or Disabled) from the drop-down list.
c) Click Submit. Changes are applied immediately to the XPort AR.
5. To set a CP group’s value:
a) Select the CP group from the Set drop-down list.
b) Enter the CP group’s value in the value field.
c) Click Submit. Changes are applied immediately to the XPort AR.
6. To add CP to a CP group:
a) Select the CP from the Add drop-down list.
b) Select the CP group from the drop-down list.
c) Select the CP’s bit location from the bit drop-down menu.
d) Click Submit. Changes are applied immediately to the XPort AR.
7. To delete a CP from a CP group:
a) Select the CP from the Remove drop-down list.
b) Select the CP group from the drop-down list.
c) Click Submit. Changes are applied immediately to the XPort AR.